Greet and store your kid’s belongings in the morning with this 5 Wide Kids Locker. The locker is equipped with four kid-sized sections that feature two double pronged locker hooks in the middle. Great for storing the backpacks, jackets or the favorite costumes! Additionally, there are 2 smaller cubbies above and below each section for the lunchboxes and shoes. The open layout provides easy access to the belongings and the natural finish is perfect for any classroom or home décor. Constructed...
Penco storage lockers ensure secure, reliable and quiet operation. These steel lockers feature a tamper-proof chrome plated lathing pull handle that offers smooth one-handed fingertip operation. Metal storage lockers include right-hand butt hinges recessed into the doorframe to prevent forceful entry or tampering. Locker doors feature mortis and tenon construction with spot welding for rigidity. Continuous door strike ensures secure closure. Door strikes are padded to dampen noise. Latching channels have nylon glides to reduce sound when opening or closing. Legs add 6" to height. Single Tier School Lockers have 3-point latching (top, bottom and sides); 18”D Lockers include coat hooks and coat rod. Double Tier and Triple Tier Storage Lockers have 2-point latching (top and bottom) Includes coat hook. Two Person Lockers include coat rod on 18” and 21” deep lockers; Coat hooks on 15”deep. Lower door controls operation of one 9-1/2”H upper compartment. Six Tier Box Lockers have friction latch and hasp (padlocks sold separately). 16 Person Lockers include sixteen 12”W x 18”D x 12”H compartments and a center coat rod. It's recommended to anchor lockers to floor and/or wall for safety. Powder coat finish available in the following colors: Gray, Champagne, Marine Blue, or Burgundy.
Vanguard lockers feature right-hand butt hinges recessed into the doorframe to prevent tampering and forced entry. Office lockers include tamper-proof chrome plated latching handles that provide smooth fingertip operation. Locker doors feature mortis and tenon construction with spot welding for rigidity. Continuous door strikes ensure secure closure; strikes are padded to dampen noise. Latching channels have nylon glides to reduce sound when opening or closing. Legs add 6" to height. Single Tier Storage Lockers have 3-point latching (top, bottom and sides); 18”D Lockers include coat hooks and coat rod. Double Tier and Triple Tier Employee Lockers have 2-point latching (top and bottom). Includes coat rod. Six Tier Box Lockers have friction latch and hasp (padlocks sold separately). 16 Person Lockers include sixteen 12”W x 18”D x 12”H compartments and a center coat rod. Recommended to anchor steel lockers to floor and/or wall for safety. Powder coat finish available in the following colors: Gray, Champagne, Marine Blue, or Burgundy.
Serving Industrial Equipment Clients in: Austin, Atlanta, Baltimore, Boston, Calgary, Charlotte, Chicago, Columbus, El Paso, Dallas, Denver, Detroit, Edmonton, Houston, Indianapolis, Jacksonville, Los Angeles, Las Vegas, Louisville, Memphis, Miami, Montreal, Nashville, New York, Oklahoma City, Ottawa, Philadelphia, Phoenix, Portland, San Antonio, San Jose, San Diego, San Francisco, Seattle, St Louis, Tampa, Toronto, Vancouver, Washington DC & Throughout the Known World.
Used lockers are available in a variety of styles from American Surplus. We typically stock used box lockers, full door lockers, garment lockers, and half door lockers. ASI currently has large quantities of lockers in stock and we have all styles to suit your various storage needs. Our used lockers are in great condition, and are inspected for damage and wear prior to shipment.
getting a locker and decorating it is one of the most exciting parts of going back to school. this year, stock up on all the locker accessories and locker decorations you want for the low price of five dollars each, when you shop at five below. your locker decorations will help you express your personal style and will also help you to stay organized throughout your school day. when you’re in middle school and high school, visiting your locker for a quick hang-out session with friends is one of the most important aspects of any day. it’s your first stop when you walk into the school in the morning, you visit between every class, and it’s your last stop before you head home for the day. for this reason, you want your locker to look amazing. get excited every time you open up your locker by decorating it with super fun school locker accessories from five below.
Fully-Assembled, Fully-Loaded and ready to use right out of the box! Ready-Built II lockers ship complete slope tops, closed metal base and include a master-keyed controlled combination padlock for each locker door so lockers are ready to use the minute they arrive. Our multi-point gravity lift-type latching for wardrobe lockers assures a secure locker while box lockers offer a simple thru-the-door finger pull single-point latch. All doors are louvered for ventialtion and include a...

Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
The Fremont Union High School District Board of Trustees is committed to equal opportunity for all individuals. The District prohibits discrimination, harassment, intimidation, and bullying based on actual or perceived ancestry, age, color, disability, gender, gender identity, gender expression, nationality, race or ethnicity, religion, sex, sexual orientation or association with a person or a group with one or more of these perceived or actual characteristics. The Board shall promote programs ensuring that discriminatory practices are eliminated in all acts related to school activity or school attendance within a school under the jurisdiction of the superintendent of the school district. The District requires that school personnel take immediate steps to intervene when it is safe to do so and when he or she witnesses an act of discrimination, harassment, intimidation, or bullying.
Locking options: various types of key locking or padlocking facility are available now. Key locking options include flush locks, cam locks, or locks incorporated into a rotating handle; padlocking facilities may be a simple hasp and staple, or else a padlocking hole may be included in a handle, often called a latchlock. More modern designs include keyless operation, either by coin deposit (which may or may not be returned when use of the locker terminates), or by using electronic keypads to enter passwords for later reopening the locker. Some older lockers used a drop-latch which was incorporated into the door handle, and slid up and down and could be padlocked at the bottom in the "down" position, but these are less used now. Three-point locking is not possible with this type of latch, because it needs to be operated by means of a latch that rotates rather than slides up and down; so this drop-latch is probably a less secure locking option, which may be why it is little used nowadays. Prefect Combination locks are very popular in school lockers used in the UK due to their ease of use and the time and cost saved in the removal of locker keys.
Founded in 1976, Hollman, Inc. is the industry leader in locker design and solutions.  We have manufactured more than two million lockers for high-profile organizations, including the NFL, NBA, MLB, NHL, major American golf courses, corporate centers, country clubs, fitness studios and gyms, college campuses, museums, and hospitals. Our lockers are built to inspire teamwork, collaboration, innovation, and trust among the users.
One thing that box lockers can’t do that nearly all other styles of lockers can (depending on their height) is hang garments. Box lockers allow for a maximum number of units in a small space, but are too small to hang your jacket. Garment lockers utilize box lockers, and a coat rod is mounted under the lockers between the vertical sections. This allows for employees to hang full length garments, while still being able to secure their other personal items in their individual lockers.
Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.
×