Laundry lockers are used in places like hospitals and food-processing workplaces where uniforms have to be collected, laundered, then returned to their owners. The locker cabinet contains a number of very narrow lockers, each of whose doors is keyed using a key held by the owner, so that they have access only to their own locker; but the entire array of doors is embedded in a much larger door covering the entire front of the cabinet. Opening this opens all the lockers simultaneously, and requires the use of a master key which is held by whoever collects items deposited in lockers, for laundering, then returned in the same way, after which they items are accessible to owners using their individual small doors.

Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
Invincible II™ doors are made from heavy 14-gauge steel. Sides, tops, bottoms and shelves are 16-gauge steel. Backs are 18-gauge. Doors and sides are perforated with a diamond-shaped pattern to provide maximum air circulation while maintaining security. Solid doors are an option. Invincible II lockers come in a variety of styles: 1 tier, 2 tier and 3 tier all have the Classic III stainless steel recessed pocket and multi-point latching as standard.
Over a 20-year period, tremendous savings are realized by investing in Duralife Lockers compared to investing in metal lockers. The above chart takes into account the initial costs of maintenance, dent and scratch repair, repainting, graffiti removal and replacement of damaged and corroded parts to create a cost of ownership model. Within 2 years, HDPE lockers are less expensive than metal lockers. In 20 years, the accumulated savings are substantial.
Penco storage lockers ensure secure, reliable and quiet operation. These steel lockers feature a tamper-proof chrome plated lathing pull handle that offers smooth one-handed fingertip operation. Metal storage lockers include right-hand butt hinges recessed into the doorframe to prevent forceful entry or tampering. Locker doors feature mortis and tenon construction with spot welding for rigidity. Continuous door strike ensures secure closure. Door strikes are padded to dampen noise. Latching channels have nylon glides to reduce sound when opening or closing. Legs add 6" to height. Single Tier School Lockers have 3-point latching (top, bottom and sides); 18”D Lockers include coat hooks and coat rod. Double Tier and Triple Tier Storage Lockers have 2-point latching (top and bottom) Includes coat hook. Two Person Lockers include coat rod on 18” and 21” deep lockers; Coat hooks on 15”deep. Lower door controls operation of one 9-1/2”H upper compartment. Six Tier Box Lockers have friction latch and hasp (padlocks sold separately). 16 Person Lockers include sixteen 12”W x 18”D x 12”H compartments and a center coat rod. It's recommended to anchor lockers to floor and/or wall for safety. Powder coat finish available in the following colors: Gray, Champagne, Marine Blue, or Burgundy.
Half door and two person lockers use as much space as a single full door locker, but they are split into two units, which doubles the number of lockers overall. These are extremely popular because they are a nice middle ground between full door and box lockers. They provide a moderate amount of storage space while also being more efficient on overall space than full door lockers. Used half door lockers are one unit over the other, each unit being the same with as a full door locker. Two person lockers are two vertical units side by side, which are the same width as one full door locker as well. They also have two small shelves overhead for storage of small items.
Standard 4-, 5-, 6-, 8- and 9 tier box locker doors have a padlock hasp and a friction catch. Available at extra cost is a spring-loaded catch. Both 2- & 3 tier lockers have horizontal frame members welded between the doors for added strength and security. 24” wide lockers have full width doors. If slope tops are required, use hoods. All Invincible II lockers accept built-in locks or padlocks and have rubber bumpers on the latch hooks to reduce noise.
shop school locker accessories and essentials like solid metal combo locks, locker shelves, magnetic pencil bins, magnetic dry erase boards, mesh locker bins, magnetic locker mirrors, magnetic picture frames. magnetic pencil holders will make it easy to keep track of writing utensils and other items that you may need on the fly. once you have all the important goods to keep you organized, have some fun decorating your locker with super fun locker accessories like magnetic locker chandeliers, plush locker rugs, bling magnets, bejewelled magnetic locker mirrors and white boards, and more. you’ll have a blast picking out awesome locker decor, and you will still have room for your backpack, binders, and notebooks.  

We also help you hit another trend: green. We create eco-friendly lockers that deliver high LEED scores, and our UV-cured, zero-VOC finishes ensure that your locker room never has that chemical smell. And to keep your locker room looking great, we offer locker surfaces like Phenolic which are perfect for moist environments, and Nanolam, which resists scratches and fingerprints.

School Locker

×