With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Available in single-, double- or triple-tier configurations, this collection features 14 gauge doors with 16 gauge full-height reinforcement channels, frame-secured 11 gauge frame hooks with protruding padlock hasps, and a maintenance-free, single-point latching system.
Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.

Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
To mark the launch of Safer Internet Day 2016, We hosted a symposium on ‘Sexting and the Consequences for Schools’. The aim of this event was to support schools dealing with the complex issues around explicit self-generated images of minors. Experts from the legal profession, law enforcement, curriculum and policy all shared their knowledge on this important topic.
My daughters have been excited for months to get this new Babymouse book. The only downside to its arrival was discovering is that it's actually the beginning to a whole new crossover early chapter book style Babymouse and not a full graphic novel. It has occasional graphic novel style sections but is primarily words. One of my daughters was fine with the change. The other was heartbroken since she loves the original 20 books (and has read them all too many times to have kept track).
Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.
I needed to get a locker for my fiancee so he had something to store his belongings into at work. I was able to order this fairly easy and received it in the mail on the day it was due to arrive without any damage to it at all. Now why only four stars? I was not very happy with the finished product regarding the holes not lining up for the screws. I ended up having to tac weld the locker which I should not have done! Other than that it looks great, is sturdy, and does the job it is intended to do!
I needed to get a locker for my fiancee so he had something to store his belongings into at work. I was able to order this fairly easy and received it in the mail on the day it was due to arrive without any damage to it at all. Now why only four stars? I was not very happy with the finished product regarding the holes not lining up for the screws. I ended up having to tac weld the locker which I should not have done! Other than that it looks great, is sturdy, and does the job it is intended to do!

Lockers are a specialty at A Plus Warehouse. No order is too small, and no order is too large! We know how useful the right storage equipment can be, which is why we provide a huge variety of lockers for any application you can imagine. Choose office lockers, school lockers—even high-security electronic access lockers! Whatever use you have for our lockers, we carry lockers for sale that meet your needs.

No matter the class size or variety, school lockers are a must. Between the mix of classes, clubs, sports, and productions, there are a lot of books, uniforms, bags, homework, jackets, and everything in between. A locker is a home base for not only schoolwork, but a social spot for friends, the one place where students know that they and their belongings are secure. From hallway lockers to locker rooms, from preschool through college, we have every kind of locker for school that you could possibly need.

Locker

×