As we have learned about this incident I want to be transparent and share that a group of students did attempt to alert a member of our staff to an issue in the girls locker room approximately two weeks ago. After talking with the staff member, I believe the nature of the issue was not clear, and that had the staff member understood what exactly the issue was, they would have acted immediately. However, good intent is not good enough and I apologize that action was not taken at the time.
Perfect for warehouses, retail stores, and restaurants, employee lockers are available in many different sizes and configurations, so they can fit in almost any storage space. You can also set up a wall of lockers for guests to rent out for the day at your theme park or gym, giving your establishment some extra income and your patrons peace of mind.

Bank size: It does not necessarily refer to the total number of compartments, but rather the number of compartments wide the entire cabinet is. So a bank of three may contain six lockers, for example, if they are two-tier lockers. In short, the total number of lockers is the bank size multiplied by the number of tiers. Sometimes the term "bay" is used instead of "bank", although "bank" appears to be the more standard term; on other occasions, "bay" refers to a single locker width within a bank, including all tiers of locker directly on top of each other.
The solid grade laminate doors are highly resistant to scratching, they do not absorb moisture and are they highly heat resistant. Importantly they can take an impact without fear of distortion which unlike a steel locker door, means that they will not bend or dent. In any school, college or academic setting having school lockers that can withstand the knocks from your students means that you will get a school locker that will provide longer useful service than a standard school locker. Both the overlay and inset doors are designed to stop the doors been deliberately forced inwards as may be experienced in a deliberate vandal attack. The inset door has a unique anti vandal designed door frame stop.
Fully-Assembled, Fully-Loaded and ready to use right out of the box! Ready-Built II lockers ship complete slope tops, closed metal base and include a master-keyed controlled combination padlock for each locker door so lockers are ready to use the minute they arrive. Our multi-point gravity lift-type latching for wardrobe lockers assures a secure locker while box lockers offer a simple thru-the-door finger pull single-point latch. All doors are louvered for ventialtion and include a...
Students and their parents are responsible for, and will be charged for, any damage to or loss of school property that may result through the use of lockers. This includes any loss as a result of vandalism. Lockers have been subject to weekend and after school vandalism. The school will not replace any personal property brought to school or placed in lockers. 
To mark the launch of Safer Internet Day 2016, We hosted a symposium on ‘Sexting and the Consequences for Schools’. The aim of this event was to support schools dealing with the complex issues around explicit self-generated images of minors. Experts from the legal profession, law enforcement, curriculum and policy all shared their knowledge on this important topic.
For over 16 years we have been selling lockers of all kinds by all the top trusted brands, including Hallowell, Tennsco, Penco, Pucel, Sandusky, Edsal, and Republic. Chosen by offices, schools, and warehouses nationwide, we at A Plus Warehouse stand by these brands and their commitment to quality. We choose to carry their lockers because we know they can be depended on.
Interloc is proudly an Australian company supplying and installing lockers Australia wide. Our lockers are also proudly made in Australia. Interloc has also an extremely long history as one of the constant innovators in locker design. Given the long history we have with locker design and locker installations, we have now the enviable position of having sales and installation services in all capital cities in Australia.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
When I finally received my copy of Babymouse Tales from the Locker #1, I found a spunky, ambitious pre-adolescent rodent with delusions of grandeur, which makes for a great middle-grade read. Babymouse finds her passion for film and sets forth to direct an epic film, but finds her plans thwarted by demanding cast and crew members, a tiny budget, and some unrealistic expectations.
[EDIT] I received a very prompt reply back that this company is sending me out a replacement set for my one bum lock! They also suggested I try another (default) code to see if that would make my one work. But either way they're sending me out a new set and not making me return the bum one! Fantastic customer service--I'm extremely happy with them!!

To see if ShippingPass is right for you, try a 30-day free trial. Also, with ShippingPass, there is no need to worry about commitment. If you decide you want to discontinue the service, you can cancel your subscription at any time. No matter what your shipping needs, Walmart's got you covered. Sign up for ShippingPass so you can shop more, save money and live better.


Plastic Lockers are ideal for high-humidity applications, as these virtually maintenance-free lockers will never rust, rot, corrode or fade. These lockers are available in multiple configurations and are backed by a 15-year warranty. Optional configurations like Lattice Lockers, or doors with other non-standard vents can be obtained through ASI Storage Solutions. Please consult our customer service team to be advised on changes in pricing and delivery lead times for all non-standard items.

Used for use in schools and gym locker rooms. Capital® lockers provide performance and reliability. Locker doors are equipped with a catch-free recessed handle and padlockable friction hasp for quiet operation and ventilated with 2 sets of louvers. Reinforced, welded frame-and-door assemblies ensure maximum security. Durable powder coat finish resists wear and scratches for years of attractive service. Legs add 6" to height. Personal storage lockers include blank number plates. Optional locks, numbered plate kits and bases sold separately. Metal lockers are available in Tan or Gray. Assembled steel lockers are not returnable.
Over a 20-year period, tremendous savings are realized by investing in Duralife Lockers compared to investing in metal lockers. The above chart takes into account the initial costs of maintenance, dent and scratch repair, repainting, graffiti removal and replacement of damaged and corroded parts to create a cost of ownership model. Within 2 years, HDPE lockers are less expensive than metal lockers. In 20 years, the accumulated savings are substantial.
SCHOOL DISMISSED EARLY ON NOVEMBER 20; NO SCHOOL ON NOVEMBER 21, 22, AND 23. School will be dismissed early on Tuesday, November 20, due to a School Improvement Inservice.  Early dismissal times are as follows:  C.R. Hanna Elementary School at 11:22 a.m., Orion Middle School at 11:28 a.m., and Orion High School at 11:32 a.m.  School will not be in session on Wednesday, November 21, Thursday, November 22, and Friday, November 23, for Thanksgiving Break.  Have a Happy Thanksgiving!
Constructed of 16-Gauge steel Salsbury 61000 series single Constructed of 16-Gauge steel Salsbury 61000 series single tier metal lockers offer privacy and space for personal storage needs. Single tier metal lockers are available in a gray tan or blue powder coated finish and as unassembled or assembled units. These durable lockers are available in heights of 5 ft. ...  More + Product Details Close
×