Lyon Ready To Assemble Steel Lockers are solidly constructed for long lasting durability. Lyon storage lockers include a padlockable hasp (lock sold separately) within the recessed handle to provide a catch-free surface. Single Tier Steel Lockers are practical and widely used as school lockers. Two Person Lockers feature 2 compartments for each occupant. Four, Five and Six Tier Box Lockers are used for the storage of high density or individual belongings and supplies. Lyon recommends anchoring steel lockers to floor and/or wall for safety. Single or double prong coat hooks available with some models. Available types are One to Six Tier, Four Person Wall, Two Person, and 16 Person Lockers. Color finishes are Gray and Putty. Includes Lifetime Limited Warranty. Dimensions vary per model.
Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
I purchased these lockers for my husbands engineering office. Several of the men do field work and when they are in the office their STUFF is all over the place. The lockers depth of 18" is plenty wide to accommodate a regular clothes hanger without crowding or having to force it in. It will hold a jacket or rain gear, steel toe or rubber boots as well as a tool belt or small tool kit.
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
Students and their parents are responsible for, and will be charged for, any damage to or loss of school property that may result through the use of lockers. This includes any loss as a result of vandalism. Lockers have been subject to weekend and after school vandalism. The school will not replace any personal property brought to school or placed in lockers. 
You can trust A Plus Warehouse to ship your metal lockers with care. We provide ample interior and exterior packaging for your orders, placing them on oversized pallets to minimize risk of damage during shipping. We ship school lockers nationwide from our regional distribution centers. Do you want lightning-quick delivery in LA, NYC, Chicago, Miami, Boston, or other major cities? Then you’ve found the right source!
I have 4 kids under age 5 and was constantly bothered by their coats and shoes being lost all over the house. This has been fantastic for organizing all their hats, gloves, shoes, boots, coats, jackets, backpacks, etc. It has held up very well despite being packed with more than I ever expected to fit in it. The kids know as soon as they walk in the door to go hang up their coats and backpacks and to put their shoes in their cubbies. I anticipate being able to use this for at least 10 years to come. It's incredibly sturdy and well-made. My husband assembled it in less than an hour and the directions were very clear.
Half door and two person lockers use as much space as a single full door locker, but they are split into two units, which doubles the number of lockers overall. These are extremely popular because they are a nice middle ground between full door and box lockers. They provide a moderate amount of storage space while also being more efficient on overall space than full door lockers. Used half door lockers are one unit over the other, each unit being the same with as a full door locker. Two person lockers are two vertical units side by side, which are the same width as one full door locker as well. They also have two small shelves overhead for storage of small items.
Clean/dirty lockers normally have two or three parts within the locker. One part is meant for dirty or clothes that are worn, and the other side for clean clothes. These lockers are meant for hospitals or other medical workplaces where it is useful to keep work and personal clothes apart to reduce the risk of infection. These lockers are also useful for factories where work clothes can become dirty and it can be very useful to keep them apart from personal clothes.
Convenient storage space, plus a bench for children to sit while putting on shoes or boots! Constructed with all-birch veneer panels with dado construction for added strength and durability, and screw block reinforced top panels. Unit is protected with 4 coats of environmentally friendly, chemical and stain resistant, UV acrylic finish. For maximum stability, lockers must be secured to the wall. Arrives fully assembled.

Standard 4-, 5-, 6-, 8- and 9 tier box locker doors have a padlock hasp and a friction catch. Available at extra cost is a spring-loaded catch. Both 2- & 3 tier lockers have horizontal frame members welded between the doors for added strength and security. 24” wide lockers have full width doors. If slope tops are required, use hoods. All Invincible II lockers accept built-in locks or padlocks and have rubber bumpers on the latch hooks to reduce noise.
This KidKraft Medium Locker is the perfect way to keep your child's room tidy. It helps kids organize everything from their important school supplies to their favorite toys. It is available in multiple colors and you can choose the one that complements the color scheme of the room. It features two storage compartments, which provides ample storage space. It is a practical and versatile locker for any home. You can place this in the playroom, daycare center, or in the bedroom. It helps your...
Salsbury metal lockers are made of powder coat steel for long lasting durability and corrosion resistance. Units include lift handle and recessed hasp and accommodate combination or key locks for added security and theft protection. Available assembled or unassembled. Available types are Single Tier, Double Tier, Triple Tier, Four Tier, Five Tier, Six Tier and 16 Person. Groups are 1 Wide and 3 Wide. Openings range from 1 to 18. Colors are Blue, Gray and Tan. Dimensions vary per model.
For over 16 years we have been selling lockers of all kinds by all the top trusted brands, including Hallowell, Tennsco, Penco, Pucel, Sandusky, Edsal, and Republic. Chosen by offices, schools, and warehouses nationwide, we at A Plus Warehouse stand by these brands and their commitment to quality. We choose to carry their lockers because we know they can be depended on.
Attractive, functional, durable, and easy to install! Maximize your space and keep students organized with I.D. Systems lockers. The Lockers 1 Tier 3 Wide Employee Locker are built to withstand the daily wear and tear and are guaranteed free of defects in materials and workmanship for up to five years. This triple wide locker with a shelf in each locker provides adequate space for storing personal belongings and school supplies. Each solid door opens to 180-degrees to keep doors from swinging...
NOTE: Colors shown are as close to actual finishes as the printing process allows. Do not make your final color selection based on the color shade shown on this page. Penco Color Charts are available for a more accurate color match. Exposure to high humidity, chlorine salts, abrasive cleaners, germicidal cleaners and acids can damage the finish and will void the guarantee. For outdoor applications or other harsh environmental conditions, contact your Penco Representative.
We make our metal lockers of prime, high grade class 1 mild annealed, cold-rolled steel. Additionally door frame corners are lapped and welded of 16 gauge steel to form a strong, rigid assembly. Furthermore Lyon fits all locker doors with nylon lockbar guides to reduce clanging and provide a smoother, quieter operation which is perfect for a school locker. These double tier lockers fit great as middle school lockers or high school lockers as well as gym lockers.
A proper fitness center locker room must allow the member to conveniently utilize their wood locker. High quality locking mechanisms are extremely important in the locker room of a fitness club as multiple members typically use the same locker throughout the day. While the padlock hasp is considered the “standard” lock for the fitness industry, Legacy Lockers offers the widest range of locking mechanisms in the industry. Please visit our lock information page to review the available options or call your sales representative for suggestions and pricing information.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Plastic Lockers are ideal for high-humidity moisture applications, as these virtually maintenance-free lockers will never rust, rot or corrode. These lockers are available in multiple configurations and are backed by a 15-year warranty.

Buy Locker For Sale

×