Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well.
The Pro Collection is specifically designed for applications that require easy access to uniforms and equipment. Select the configuration that best suits your needs by adding a lockable security box and/or a footlocker with a reinforced top that doubles as a seat. The open front and perforated sides allow for full ventilation, with a large dedicated storage area.
SCHOOL BOARD ELECTION Orion Community Unit School District #223 will have four (4) School Board seats to be filled at the April 2, 2019, Consolidated Election. Candidates who are elected will fill four-year terms expiring in April 2023.Candidates for the office of School Board can begin to circulate nominating petitions for signatures beginning September 18, 2018. The period for filing nominating papers runs from December 10 through December 17, 2018, at the Henry County Clerk's Office in Cambridge, Illinois.Additional information and petitions may be obtained at the Illinois Association of School Boards' website: www.iasb.com/elections OR the Henry County Clerk's Office in Cambridge, Illinois (or their website: www.henrycty.com) OR the State Board of Elections ...
In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes. However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.
Categories: English words suffixed with -erEnglish terms derived from Old EnglishEnglish terms derived from Proto-GermanicEnglish lemmasEnglish nounsEnglish countable nounsEnglish terms with rare sensesen:AutomotiveEnglish terms with historical sensesGerman terms with audio linksGerman lemmasGerman adjectivesGerman non-lemma formsGerman verb formsSpanish lemmasSpanish nouns
I have 4 kids under age 5 and was constantly bothered by their coats and shoes being lost all over the house. This has been fantastic for organizing all their hats, gloves, shoes, boots, coats, jackets, backpacks, etc. It has held up very well despite being packed with more than I ever expected to fit in it. The kids know as soon as they walk in the door to go hang up their coats and backpacks and to put their shoes in their cubbies. I anticipate being able to use this for at least 10 years to come. It's incredibly sturdy and well-made. My husband assembled it in less than an hour and the directions were very clear.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Constructed of 16-Gauge steel Salsbury 71000 series single Constructed of 16-Gauge steel Salsbury 71000 series single tier vented metal lockers offer space for personal storage needs where visibility and ventilation is needed. Single tier vented metal lockers are available in gray tan or blue powder coated finish and as unassembled or assembled units. These durable lockers are available ... More + Product Details Close
There are a number of features or characteristics which may vary in lockers. Because purchasers will need to specify what they want in each of these when ordering, it is more common to order a particular configuration rather than buy "off the shelf" in a shop, although certain very common configurations can be found in shops fairly easily. These features include:
These steel storage lockers feature sturdy, boltless construction that assembles easily without the use of tools, just snap together. Boltless lockers offer the same strength and theft prevention as standard metal lockers. Quick assembly personal storage lockers feature one top and one bottom fixed height shelf for added storage space. Full width garment bar allows easy wardrobe storage. Doors feature a 2-point locking system with recessed locking handle and single prong hook. Bottom of locker door is louvered for ventilation. Powder coat finish.